Filters

Showing 1–24 of 47 results

View 24/48/All

Brands

Size

Price Filter

1-24 of 47 products

  • New
    $650.00

    Phil Wood Track Hub Rear High Flange Pro 32H

    , ,
    Our Pro rear high flange double fixed track hubs are available in 24, 28, and 32 spoke hole configurations (other spoke hole count options are available upon request). Our Pro track hubs come with our Carbonyte Phil spec bearings which are our low drag bearing option which have partial contact seals and have a 30% fill with our full synthetic Phil Carbonyte grease.
    $650.00
    $650.00
  • New

    Phil Wood Track Hub Front High Flange Pro 32H

    , ,
    Our Pro front high flange track hubs are available in 20, 24, 28, and 32 spoke hole configurations (other spoke hole count options are available upon request). Our Pro track hubs come with our Carbonyte Phil spec bearings which are our low drag bearing option which have partial contact seals and have a 30% fill with our full synthetic Phil Carbonyte grease.
    $575.00
  • New
    Placeholder
    Placeholder

    Phil Wood Stem Cap 1-1/8 Alloy

    , ,
    We manufacture our aluminum stem caps from US-produced 7075 aluminum. We engrave our script “Phil” into each stem cap and hand paint them just like our hubs. All of our stem caps are machined in-house to the same high-quality standards we apply to all of our products. Our stem caps are only available for 1" and 1-1/8" headsets.
    $32.00
  • New

    Phil Wood Hub Centre Lock Disc Brake T/A 100mm

    , ,
    Our front Center Lock disc hubs are available in 24, 28, and 32 spoke hole configurations (other spoke hole count options are available upon request). We also offer our front Center Lock Disc hubs with 2 bearing options: Standard Phil spec bearings which have full contact seals and have a 100% fill with our Phil Waterproof grease. Carbonyte Phil spec bearings are our low drag bearing option which have partial contact seals and have a 30% fill with our full synthetic Phil Carbonyte grease. Please note: When checking out please specify in the notes section which end cap set you would like with your front Center Lock disc hub. You can select one of the following: standard Q-R, 12 mm thru axle or 15 mm thru axle. All options will give you a 100 mm spacing. 
    $459.00
  • Sold out
    $209.00

    DT Swiss: Rim E532

    , ,
    Sleeved 30 mm Enduro rim, ready to eat rocks. Bringing wide profiles to the most demanding enduro riders, both price- and performancewise. A sibling of our EWS winning welded rims, the E 532 packs the materials and technology the worlds fastest racers use and puts it into an affordable rim for everyday chargers.
    $209.00
    $209.00
  • $219.00

    DT Swiss: Rim TK 540

    , ,
    Highly reliable and robust rim - engineered for daily commutes or the next around-the-world bike trip. The perfect rim for trekking or touring use, the TK 540 is ideal for those looking for the ultimate single welded strong aluminum rim. With double eyelets, the rim is plenty strong for touring the country side or commuting use.
    $219.00
    $219.00
  • $119.00

    DT Swiss G540 32H 700C

    , ,
    The sleeved aluminium Gravel rim is the ideal choice for riding over gravel, roots or small obstacles on unpaved paths. The robust all-round rim with its inner width of 24 mm and its wide knobby tires up to 53 mm is suitable for various purposes and provides great comfort.
    $119.00
    $119.00
  • Honjo turtle 35
    $180.00$235.00

    SimWorks: Honjo Fenders Turtle 35

    , , ,

    Honjo’s hammered fenders with their beautiful “Kikko” patterns are well-known by so many cyclists around the world. Making the pattern is very much confidential and even we do not know how they achieve it. If you are looking for a genuine fender, then this “Turtle 35” is waiting for you. Wheel Size: 700c Tire Size: ~25mm U Stay: 4mm diam.

    $180.00$235.00
    $180.00$235.00
  • $195.00$235.00

    SimWorks Honjo Fenders Smooth 62

    , , ,
    Smooth 62 will fit widely into tourer and daily commuter bikes. Light weighted and very durable, moreover super comfortable ride in a rainy day. *Comes with Front & Rear fender & Standard Stay Kit Size: 650b, 700c Max Tire Size (Estimate):~50mm U Stay: 5mm diam.
    $195.00$235.00
    $195.00$235.00
  • $18.00

    SimWorks: Fender Sliding Bridge

    , , ,

    Use a stainless steel sliding bridge to attach the mudguard more securely. It prevents cracks from the installation process and distributes stress points over a wider area of the fender. Includes affixing hardware. For FLAT 80 (H101).

    $18.00
    $18.00
  • Pack it right voile straps
    Pack It Right Voile Straps Orange
    $18.00$25.00

    SimWorks: Pack It Right Straps

    , , , ,
    Need to: - Tighten an inner tube or tool roll to your bike frame? - Strap a U-lock to your basket? - Run through the endless desert, with plenty of water in a huge Nalgene bottle secured to a large bottle cage? Now you don't have to worry about your baggage flailing or rattling around!

    Your imagination is your only limitation in implementing this wildly versatile and useful Polyurethane buckle strap. Just pull the strap tight and fix the buckle to a wide range of holes on the strap. Voila! Truly endless possibilities for solving the problem of affixing gear to your bike. Pack It Right !! Strap Material: UV-Resistant Polyurethane Buckle Material: Nylon: Super Tough Nylon, XL Aluminum: Hardened Aluminum Size: 20" / 50.8cm with Nylon Buckle, 32" / 81.3cm with XL Aluminum Buckle Origin: Voile Straps Utah, U.S.A

    $18.00$25.00
    $18.00$25.00
  • Sim works x Nitto Obento black front bicycle rack

    SimWorks Obento Rack

    , , ,

    Simple form and function for your daily use and light touring. This simple front rack is designed to have more cyclists use our popular Potluck style of rack, and it features a lunch box size compact table as well as Potluck Rack has.

    Since there is long size connection rod and clamp in order to correspond to any front folk systems, you can still attach this rack without eyelets. It has a perfect form to match with our On The Road Rack as well.

    Once you have your Obento lunch box tied on this rack, let’s go to that hillock! Material: 9mm CrMo Steel Tube / Main Frame Weight: ave.635g Max Load: 5kg Color: Chrome Plated & Black Accessories: Connection Rod 420mm x 2 Connection Rod 350mm x 2 Clip Band 22mm x 2

    *This item is designed for a front bag supporter, which means it supports a bottom part of a bag hanging from a handlebar. Please be careful about the withstanding load when you put something by itself on the rack.

    $315.00
  • Sim Works x Nitto potluck chrome front bicycle rack
    Sim Works x Nitto potluck black front bicycle rack

    SimWorks Potluck Rack

    , , ,
    Simple form and function for light touring and also just for commuting. This front rack is designed and inspired by a ‘potluck party’ which you already know that people bring their own foods too. It features sidebars for pannier bags or a bungee cord, and a 6-pack sized compact table(200mm x 200mm square). The form itself matches the road rear rear carrier. Why don’t you put a fresh-baked pie on it and let’s go for a potluck party before it gets cold!!! Material: CrMo Steel Tube Weight: ave.780g  Maximum Load: 5kg Leg length: 332mm to 352mm / Refer geometry *Threaded Adjuster should be inserted 15mm at least. Color: Chrome Plated & Black  [FEATURES UPDATED] - Threaded Height Adjuster - More durable mainstay Attention: Use the rack within the maximum load capacity, when loading capacity is increased by attaching a basket, it corresponds to "modifying" and will be out of warranty subject in case of failure.
    $349.00
  • SimWorks: Rhonda Stem

    , , ,

    The New Rhonda faceplate incorporates our amorous and timeless “arrow through heart” logo-we hope you love the minimal but iconic design. The 31.8mm diameter bar clamp has an evenly distributed high fixing force of 4 bolts. Silver is chrome-plated and black is plated to improve weather resistance. We aimed for a simple, durable and long-lasting stem that would complement a wide array of handlebar options 

    Nitto stems like all of their fantastic products are manufactured to the highest standards for quality and durability in a domestic factory in Japan *SimWorks logo decal is included. Material: CrMo Steel body with Al Faceplate Extension: 50, 60, 70, 80, 90, 100, 110 & 120mm Angle: 80 deg. Bar Clamp: 31.8mm Post diam.: 28.6mm Post Stack Height.: 42mm Colour: Silver & Black

    $219.00
  • SimWorks: Caroline Stem

    , , ,

    A beautiful road racer needs a beautiful stem. A brilliant fillet finishing by NITTO’s craftsmanship. Undoubtedly, there is a multitude of cyclists who are fascinated by the beauty of the curve. This is what we call, “Japanese made high quality”. Material: CrMo Steel Extension: 80, 90, 100, 110 & 120mm Angle: 80 deg. Bar Clamp: 31.8mm Post diam.: 28.6mm Colour: Chrome Plated & Black

    $310.00
  • SimWorks: Gettin’ Hungry Stem

    , , ,
    We are really sure that we got a revelation of Bicycle God saying, ” We need a CrMo quill stem immediately”. Some people might say that we just got inspired by something around us, and probably it is. However, After we got this idea, we run into NITTO’s factory and talk about everything that we have in our mind. We know that it is rare to see people making this kind of stem with a passion, but we think that this is our duty to produce since we got a message from God. This stem is for those who laugh and play a lot outside and getting hungry right after that. Gettin' Hungry Stem - Lettuce (SW27 / Green Cap) or Tomato (SW28 / Red Cap) Material: CrMo Steel Extension: 80 ~ 120mm Angle: 90 deg. Bar Clamp: 25.4mm Post diam.: 22.2mm Color: Silver & Black
    $169.00
  • $15.00
    $15.00
  • Sold out
    Sim Works x Nitto Beatnik Seat Post Silver
    Sim Works x Nitto Beatnik Seat Post Black back detail
    $160.00

    SimWorks: Beatnik Seat Post

    , ,

    A seat post that you need to choose out of strength, precision, style, shape and etc in order to fit your bike completely might be the only component that shows rider’s selection and taste. NITTO SimWorks “Beatnik Post” passes so many strict examinations and designed by NITTO and SimWorks all together. You can see engraved red cupid heart and white SimWorks logo. Material: Forged Aluminum Post diam.: 27.2mm Offset: 24mm Length: 300 & 350mm Weight: 270, 307g

    $160.00
    $160.00
  • SimWorks: Bubbly Pedals

    , ,

    An endless road...The pedalling stresses of a long distance tourist are converted into orbital bliss with the results of the 'Bubble Effect'. The further you ride, the more blissed out you become...SimWorks by MKS- the first of its kind! Ultra-wide Concave Platform

    MKS boasts one of their largest platforms in history. The tread's concave shape naturally accepts a wide range of sole positioning for the rider. Move those feet around periodically throughout a long ride and watch some muscle groups thank you. Triple Sealed Bearing Assembly

    Pedal spindle has increased sealed bearing support in three points to maximise rotational performance while minimising stack height- reducing rotational resistance to the utmost. (Flawless and effortless pedal spin capabilities with no slop) Chrome Plated Forged Spindle Cold-forged steel spindle with chrome-plated finish for precision and durability Size: 97 x 108 x 30mm Weight: 392g (pair) Body Material: Aluminium Alloy Plate Material: Heat-treated Aluminium + Anodised Spindle Material: Cold Forged Steel + Chrome Plated - Do not dismantle the cartridge sealed bearings. These items are pre-adjusted and maintenance free. - Do not inject lubricant into cartridge sealed bearings. Lubrication fluid stimulates grease leakage and shortens the bearing lifespan. - The dust seal cap also functions as the bearing adjuster. If you loosen the cap, it may cause play and premature wear.

    $180.00
  • spacers
    spacers
    $13.50$18.50

    SimWorks: With Me (Cr-Mo) Spacers 1 1/8

    , , ,

    Wear your heart on your bike. Add a little flair for your love with Me CrMo spacers. 1-1/8″ available in CP Polish or Black.

    $13.50$18.50
    $13.50$18.50
  • Sim Works x Nissen Shift Stainless Outer Cable
    Sim Works x Nissen Brake Outer French
    $50.00$65.00

    SimWorks: Outer Cables

    , ,

    This is a complete reproduction of a steel rounded outer cable which used to be produced between 1950 and around 1970. However, this is not just only a reproduction but including an inner liner adapting a modern usage standard, which didn’t come along within those days, and pulling a brake lever becomes much lighter. The appearance is a vintage look to fit in various kind of styles, but speed change performance is completely the same as modern technology.

    We reached the closest color of the outer cable at the time as much as possible by adjusting each color so many times, and we brought it back with the vintage look the most. It also includes flexibility, which is the greatest features of Nissen company, so that it will give you the comfort around a handlebar which makes the cable harder to turn in these days.

    $50.00$65.00
    $50.00$65.00
  • $99.00$115.00

    Velo Orange: 1 1/8″ Sealed Bearing Threadless Headset

    , ,
    A absolutely top-of-the-line 1 1/8" threadless headset for the most discerning rider. It features oversized, sealed cartridge bearings, so packing and re-greasing bearings are a thing of the past.  Specs: Fork type: 1 1/8" threadless Stack height: 28mm S.H.I.S. Upper: EC34 / 28.6 S.H.I.S. Lower: EC34 / 30 Crown Race:  30.0mm, split for easy install Weight: 112g
    $99.00$115.00
    $99.00$115.00
Action Bicycle Club