Components

Filters

Showing 1–42 of 55 results

View 24/48/All

Brands

Size

Price Filter

1-42 of 55 products

  • H Plus Son: SL42

    , ,

    The SL42 rim is the original 42mm high rim that took us over a year to develop. Like Formation Face, SL42 owes its stiffness and aerodynamics to 42mm profile height. The two models share the same lightness, reduced to around 615 grams (plus or minus 15 grams) using the G609 aluminium alloy which is also 30 percent stronger than the 6061 aluminium alloy used in standard rim manufacture. SL42 features a machined side wall for use with rim brakes.

    $179.00
  • H Plus Son: Archetype

    , ,

    The perfect all around road rim. At 470 grams, this rim has proven to be light yet not sacrificing strength, stiffness, and stability. The well accepted 23mm wide profile mimics a tubular tire, where the advantage can be felt immediately while taking corners as the tire is no longer shaped as a light bulb, flopping over with high load. Our impeccable H Plus Son workmanship and our invisible welded rim joint comes standard with each rim.

    $159.00
  • H Plus Son: The Hydra

    , ,

    Drawing obvious design cues from the hugely successful Archetype, the Hydra is a lighter, wider, tubeless-ready hoop (of course, you can still use standard clincher tires & tubes if tubeless isn't your thing). Crafted from G609 alloy, the Hydra weighs a mere 440 grams and promises to be part of a light, strong wheel. The 25mm width is optimized for the fitment of 25/28c tires, providing a more comfortable ride without the squishy feeling commonly associated with using bigger tires.

    $179.00
  • H Plus Son: TB14

    , ,

    TB14 was inspired by the classic aesthetics of rims from the era when steel frames ruled competitive cycling and benefits from contemporary improvements in rim manufacturer and profile design. We have always admired the look of the classic box section rim. From sourcing double eyelets to crafting new moulds for the valve badge and its hardware, we dedicated neurotic attention and careful detail to every aspect of this rim.

    The pairing of a 23mm wide profile with a 23mm tire is fast becoming the industry standard for competitive road cycling. The wider rim adds stiffness and gives a profile that resembles a tubular tire. The advantage of this rim/tire profile can be felt immediately when taking corners as the tire is no longer shaped like a light bulb, flopping over with high loads.

    The TB14 is made with the stiffer and stronger G609 aluminum alloy and features our unique and invisible welded joint. Rims are anodized after machining.

    $159.00
  • $119.00

    Soma: Cazadero Tyres

    , , ,

    A mixed terrain tire for a new era of riding. Gravel, dirt, asphalt. The Caz features a raised center for fast rolling on asphalt, with specially designed that corner well on dirt and maintains traction on the street.

    In a hard to find 42mm size that bridges CX and mountain biking. The 650b can be used on the Grand Randonneur, Soma ES (650b conversion), or San Marcos. Size: 650b x 42mm Weight: 470g Made in Japan by Panasonic.

    $119.00
    $119.00
  • Sim Works x Panaracer The Homage Burgundy Gravel Tyres
    Sim Works x Panaracer The Homage Sand Beige gravel tyres (detail)
  • Sim Works x Panaracer The Homage Black Gravel Tyres
    Sim Works x Panaracer The Homage Green Gravel Tyres
    $119.00$129.00

    SimWorks: The Homage Panaracer Tyre

    , , ,

    It's magic when SimWorks meets Panaracer!

    The Homage project is the Panaracer highly produced ‘Gravel King’ as you already know with the cool part of colouring and the adoption of a highly-durable special and anti-flat casing. The special casing has layers of blowout proof reinforcement materials, which also prevent side cutting and pinch flats. Moreover, ZSG natural compound which is based on a natural rubber has high impact resilience for high-performance riding and durability. Wheel Size: 700c (622) & 650b (584) Tire Width: 43mm Bead: Aramid Compound: ZSG Natural Compound Weight: 530g (700c) / 500g (650b) Casing: Anti Flat Casing

    $119.00$129.00
    $119.00$129.00
  • Sim Works x Panaracer Volummy tubeless ready tyres
    Sim Works x Panaracer Volummy tubeless ready tyres (detail)

    SimWorks: Volummy Tubeless Tyre

    , , ,

    Our goal was to make a ‘tubeless’ tire at this time. We also had tons of requests from our customers at NAHBS 2017. By researching the market, we put all those voices into the design. As you can see on the side of the tire, it shows the words of ‘Tubeless Compatible’. For 700c model, we use zylon which is stronger than usual aramid for a tire bead. A higher air pressure tubeless tire (650kPa / 95 psi).

    On the sidewall, we use gumwall material. Since most of the people who do bike touring told us, “We have problem with a usual tire that the sidewall gets torn up easily”. We know that a light tire is much more comfortable, but once you find out that it’s torn up, then you won’t be able to continue your journey at all. SimWorks Original color ‘Peanut Butter’ sidewall has high durability. Wheel Size: 700c (622) Tire Width: 32mm / 38mm Side Wall: Peanut Butter Bead: Zylon Compound: ZSG Natural Compound Weight: 32mm (454g) / 38mm (599g) *Average ※ For compatibility with the rim, please click HERE for the size compatibility chart, and be sure to use the rim size within the applicable range.

    $129.00
  • Honjo turtle 35

    SimWorks: Honjo Fenders Turtle 35

    , , ,

    Honjo’s hammered fenders with their beautiful “Kikko” patterns are well-known by so many cyclists around the world. Making the pattern is very much confidential and even we do not know how they achieve it. If you are looking for a genuine fender, then this “Turtle 35” is waiting for you. Wheel Size: 700c Tire Size: ~25mm U Stay: 4mm diam.

    $150.00
  • $199.00$229.00

    SimWorks: Honjo Fenders Smooth 62

    , , ,

    Smooth 62 will fit widely into tourer and daily commuter bikes. Light-weighted and very durable, moreover super comfortable ride on a rainy day. *Comes with Front & Rear fender & Standard Stay Kit  Size: 650b, 700c Max Tire Size (Estimate): ~50mm Finish: Melamine Baked Coating  U Stay: 5mm diam.

    $199.00$229.00
    $199.00$229.00
  • SimWorks: Honjo Fenders Flat 65

    , , ,

    So many cyclists who travel around the world have been requested the widest ATB flat-fender and here we have it, finally.

    As you can tell from its name, it is a flat form and has a very neat tire-arch. When we look at the regular fender, almost everything is arch-shaped, but if you attach this flat 65, it is going to be fresh and looks perfectly modern. Not only covering up the wide tire, but it's also sporty and very light. If you are looking for something new, then this is it. *Comes with Front & Rear fender & Standard Stay Kit. Wheel Size: 29", 27.5" Max Tire Size (Estimate): ~2.2" U Stay: 5mm diam.

    $329.00
  • Sim Works x Honjo Smooth Fender Spec

    SimWorks: Honjo Fenders Smooth 74

    , , ,

    Dream or vision? New mudguard born from the treasured mold.

    As cyclists are looking for ever more solutions for coverage and protection of themselves and their bikes, it was only inevitable that Honjo would get around to creating a gorgeous large volume mudguard in their classic "Smooth" shape. Offering ample clearance for riders running wide footprint tires. Think 2.3" realm. As always - take into consideration compatibility with a front derailleur and chain lines. 

    A newly designed standard mounting bracket is included. Wheel Size: 700c (385R) 650b (370R) Max Tire Size (Estimate): ~58mm U Stay: 5mm diam.

    $389.00
  • $19.00

    SimWorks: Fender Sliding Bridge

    , , ,

    Use a stainless steel sliding bridge to attach the mudguard more securely. It prevents cracks from the installation process and distributes stress points over a wider area of the fender. Includes affixing hardware. For FLAT 80 (H101).

    $19.00
    $19.00
  • $10.00

    Bike Tube

    , , ,
    Good quality CST Schrader or French valve tubes are made from Du Pont materials. Available in most sizes for all areas of riding. **NOTE: In order for us to send you the right tube please add your size and valve type in the delivery notes.**
    $10.00
    $10.00
  • Pack it right voile straps
    Pack It Right Voile Straps Orange
    $14.99$22.00

    SimWorks: Pack It Right Straps

    , , , ,
    Need to: - Tighten an inner tube or tool roll to your bike frame? - Strap a U-lock to your basket? - Run through the endless desert, with plenty of water in a huge Nalgene bottle secured to a large bottle cage? Now you don't have to worry about your baggage flailing or rattling around!

    Your imagination is your only limitation in implementing this wildly versatile and useful Polyurethane buckle strap. Just pull the strap tight and fix the buckle to a wide range of holes on the strap. Voila! Truly endless possibilities for solving the problem of affixing gear to your bike. Pack It Right !! Strap Material: UV-Resistant Polyurethane Buckle Material: Nylon: Super Tough Nylon, XL Aluminum: Hardened Aluminum Size: 20" / 50.8cm with Nylon Buckle, 32" / 81.3cm with XL Aluminum Buckle Origin: Voile Straps Utah, U.S.A

    $14.99$22.00
    $14.99$22.00
  • SimWorks: On the Road Rear Carrier

    , ,

    The good thing about a bicycle is that you can go shopping or touring anytime you want. To expand on the idea we created a carrier.

    The On The Road carrier is crafted from chromium molybdenum steel tubing, which is a necessity for a touring carrier as it's very durable, light and able to be repaired by re-welding. Nitto's craftsmanship has produced 'a shape with less pipes', with the main frame for the On The Road carrier made using only one CrMo tube. The Black carrier is pretreated with nickel plating and then electro deposition coated, so it won’t corrode even when the paint is completely removed while the chrome plate is easy to paint over. Material: CrMo Steel Tube Weight: Avg.775g Additional Load: 10kg Color: Chrome Plated & Black

    $379.00
  • Sim works x Nitto Obento black front bicycle rack

    SimWorks: Obento Rack

    , ,

    Simple form and function for your daily use and light touring. This simple front rack is designed to have more cyclists use our popular Potluck style of rack, and it features a lunch box size compact table as well as Potluck Rack has.

    Since there is long size connection rod and clamp in order to correspond to any front folk systems, you can still attach this rack without eyelets. It has a perfect form to match with our On The Road Rack as well.

    Once you have your Obento lunch box tied on this rack, let’s go to that hillock! Material: 9mm CrMo Steel Tube / Main Frame Weight: ave.635g Max Load: 5kg Color: Chrome Plated & Black Accessories: Connection Rod 420mm x 2 Connection Rod 350mm x 2 Clip Band 22mm x 2

    *This item is designed for a front bag supporter, which means it supports a bottom part of a bag hanging from a handlebar. Please be careful about the withstanding load when you put something by itself on the rack.

    $315.00
  • Sim Works x Nitto potluck chrome front bicycle rack
    Sim Works x Nitto potluck black front bicycle rack

    SimWorks: Nitto Pot-Luck Rack

    , ,
    Simple form and function for light touring and also just for commuting. This front rack is designed and inspired by a ‘potluck party’ which you already know that people bring their own foods too. It features sidebars for pannier bags or a bungee cord, and a 6-pack sized compact table(200mm x 200mm square). The form itself matches the road rear rear carrier. Why don’t you put a fresh-baked pie on it and let’s go for a potluck party before it gets cold!!! Material: CrMo Steel Tube Weight: ave.780g  Maximum Load: 5kg Leg length: 332mm to 352mm / Refer geometry *Threaded Adjuster should be inserted 15mm at least. Color: Chrome Plated & Black  [FEATURES UPDATED] - Threaded Height Adjuster - More durable mainstay Attention: Use the rack within the maximum load capacity, when loading capacity is increased by attaching a basket, it corresponds to "modifying" and will be out of warranty subject in case of failure.
    $349.00
  • $229.00
    $229.00
  • SimWorks: Rhonda Stem

    , , ,

    The New Rhonda faceplate incorporates our amorous and timeless “arrow through heart” logo-we hope you love the minimal but iconic design. The 31.8mm diameter bar clamp has an evenly distributed high fixing force of 4 bolts. Silver is chrome-plated and black is plated to improve weather resistance. We aimed for a simple, durable and long-lasting stem that would complement a wide array of handlebar options 

    Nitto stems like all of their fantastic products are manufactured to the highest standards for quality and durability in a domestic factory in Japan * SimWorks logo decal is included. Material: CrMo Steel body with Al Faceplate Extension: 50, 60, 70, 80, 90, 100, 110 & 120mm Angle: 80 deg. Bar Clamp: 31.8mm Post diam.: 28.6mm Post Stack Height.: 42mm Colour: Silver & Black

    $229.00
  • getting hungry

    SimWorks: Getting Hungry Stem

    , ,

    We are really sure that we got a revelation from the Bicycle Gods saying, "We need a CrMo quill stem immediately”.

    Some people might say that we just got inspired by something around us, and that is probably true. However, after we got the idea, we had to share it with NITTO. It is rare to see people making this kind of stem with passion, but we think it's is our duty. This stem is for those who laugh and play a lot outside. Probably getting hungry right after. Gettin' Hungry Stem - Lettuce (SW27 / Green Cap) Material: CrMo Steel Extension: 80 ~ 120mm Angle: 90 deg. Bar Clamp: 25.4mm Post diameter: 22.2mm Colour: Silver or Black Gettin' Hungry Stem – Tomato (SW28 / Red Cap) Material: CrMo Steel Extension: 80 ~ 120mm Angle: 75 deg. Bar Clamp: 26.0mm Post diameter: 22.2mm Colour: Silver or Black

    $149.00
  • SimWorks: Caroline Stem

    , , ,

    A beautiful road racer needs a beautiful stem. A brilliant fillet finishing by NITTO’s craftsmanship. Undoubtedly, there is a multitude of cyclists who are fascinated by the beauty of the curve. This is what we call, “Japanese made high quality”. Material: CrMo Steel Extension: 80, 90, 100, 110 & 120mm Angle: 80 deg. Bar Clamp: 31.8mm Post diam.: 28.6mm Colour: Chrome Plated & Black

    $325.00
  • Velo Orange: Daja Cycleworks Short & Shallow bars

    , , ,
    A simple and affordable short reach and shallow drop handlebar that fits bar-end shifters. The center section is highly polished, while the area under the bar tape has a "sandblasted" finish. Specs: Stem Clamp: 26.0mm Grip: 23.8mm Drop: 120mm Reach: 75mm Flare: 0 Weight: 395g (44cm size) Sizes (C-to-C at ends): 40, 42, 44, 46cm We suggest going with a stem that uses removable style faceplate, as it could be very difficult to maneuver a non-removeable clamp around the bends.
    $95.00
  • Velo Orange: Nouveau Randonneur Handlebars

    , , ,
    With comfortable fit characteristics such as shorter reach, shallow drop, and a mellow backsweep, the Nouveau Randonneur Handlebar is optimally designed for long days and nights for riders using integrated shifters and aero brake levers. The tops are ovalized and swept back ever so slightly from the stem clamp. This makes for a bigger area upon which your hands can rest. A wider palm base means road vibrations and impacts are distributed better and not centralized into a specific spot effectively reducing hand, wrist, and elbow fatigue. Additionally, the sweep lends itself better (than a straight top) to your hands' natural resting position. The ramps are 105mm in length (measured from the center of the bend to the edge of the ramp). This gives enough real estate for a full hand's worth of a position behind the hood for cruising, but short enough to easily reach the hood for shifting, braking, and out of the saddle efforts. Measuring traditionally (from the center of the stem clamp to the furthest edge of the brake lever hood mount) the reach is 85mm. The 128mm worth of drop is casual and the 12 degree worth of flare makes for terrific cornering stability and prevents your forearms from hitting the bars during punchy efforts or obstacle negotiation. The Nouveau Randonneur Bar is available in three sizes (measured center to center at the hood): 42, 44, and 46cm, two finishes: High-Polished Silver and Smooth Noir, and accepts standard road components such as integrated shifters, aero brake levers, and bar-end shifters.
    $129.00
  • Daja Cycleworks: Far Bar Handlebar

    , , ,

    The Dajia Cycleworks Far Bar is a fantastic, lightweight off-road touring bar designed to be used with road components. Unlike dirt drops of years past, these allow you to have a normal hood position in addition to an easy reach to the brake levers from the drops. These bars are compatible with bar-end shifters as well as integrated shifters.

    The Far Bars have a 21 degrees of flare, drop of 110 mm, and reach of 76 mm.

    These bars are a little different then road bars in terms of measuring the width. The listed width (44 or 48 cm) is measured center of the hoods to center of the hoods.

    The overall width is 585mm for the 44cm model, 625mm for the 48cm model. Weight is 292g.

    $155.00
  • SimWorks: Misirlou Bar

    , , ,

    We proposed this new idea to Nitto. They did not make anything like it but we knew it had to be made. We also knew it needed to be produced in a variety of sizes no one had tried to make before. After we got our hands on them we knew this was an amazingly useful handlebar. Versatility is the key to this bar, it allows you to set up the cockpit in a variety of configurations depending on the riders preference and diversity. We think once you ride it you will also know why we made it and understand the effort we put into making it. Material: Heat Treated Aluminum Width: 390, 410, 430, 450 & 470mm (center - center at ends) Center diam.: 31.8mm Bar diam.: 23.8mm Reach: 85mm Drop: 140mm Colour: High-polished Silver & Gloss Black Attention : Skid proof and clear coating are applied as a final treatment on this item and the actual size is wider than the diameter on each size description. Please be aware of the installation of the stem which has very severe inner diameter.

    $199.00
  • $249.00

    SimWorks: Getaround Stealth Bar

    , , ,

    It has been roughly 10 years since the 'Getaround' handlebar was born. During that decade passed, bikes have evolved and so has Simworks. While staying true to our humble beginnings, and the classic elements that we believe shape a beautiful and functional bicycle we are pleased to now offer a modernized take on the trusted and beloved 'Getaround Bar'.  Now crafted in heat-treated Aluminum, an alternative option in the classic 'Getaround' shape- now with a larger 31.8mm bar clamp diameter, as well as wider overall bar width, stretched to 750mm.

    The Simworks exclusive 'Stealth Gray" anodized finish and silkscreen graphics round out an attractive and comfortable update to a timeless classic. 

    Getaround Stealth bar- much like it's older brother, will make for an outstanding handlebar on any bike from your trail battered off-road machine to your trusted townie.  Material: Heat Treated Aluminum Finishing: Stealth Grey Anodized Bar Clamp: 31.8 mm Width: 750 mm Rise: 28 mm Grip Angle: 24 deg. Weight: 378 g

    $249.00
    $249.00
  • $229.00

    SimWorks: Little Nick Stealth Bar

    , , ,

    A 10-year staple in the Simworks lineup of fine handlebar offerings, Little Nick has provided riders desiring a no-nonsense, sharp-lined, zero-rise flat bar with a more ergonomic perch for their hands, by way of a handsome 15-degree flare. 

    Flash forward from that origin bar and we're pleased to offer this updated alternative. The same characteristics that made the original Little Nick a favorite amongst cyclists, are transposed here in a slightly wider width of 750mm, and a larger bar clamp diameter of 31.8mm- a size more commonly seen with today's threadless stems, including our own Rhonda, Anne Lee and Caroline stems.

    In addition to these new dimensions, 'Little Nick Stealth' is constructed of heat-treated Aluminum, anodized in a Simworks exclusive 'Stealth Grey'.

    Slightly lighter in weight than the original Little Nick bar- which is constructed of Chromoly, you've now got a modernized handlebar option that will allow you to steer confidently under the radar.  Material: Heat Treated Aluminum Finishing: Stealth Grey Anodized Bar Clamp: 31.8 mm Width: 750 mm Rise: 0 mm Grip Angle: 15 deg. Weight: 364 g

    $229.00
    $229.00
  • SimWorks: Wonderer Bar

    , , ,

    The Wanderer drop holds a shallower reach and drop, for longer grip. It's easier and quicker to move into any position you wish due to the compact cockpit. Especially suited for cyclocross competition, there's nothing better than a handle bar that doesn’t move your body making you able to move your handle bar position easier. Also fitting for smaller riders. Made in Japan. High reliability with comfortable handling. Material: Heat Treated Aluminium Width: 37, 39, 41, 43, 45cm Center diameter: 31.8mm Bar diameter: 24mm Reach: 78mm Drop: 128mm Colour: Gloss Black

  • spacers
    spacers
    $13.50$18.50

    SimWorks: With Me (Cr-Mo) Spacers 1 1/8

    , ,

    Wear your heart on your bike. Add a little flair for your love with Me CrMo spacers. 1-1/8″ available in CP Polish or Black.

    $13.50$18.50
    $13.50$18.50
  • Sim Works x Nissen Shift Stainless Outer Cable
    Sim Works x Nissen Brake Outer French
    $59.00$65.00

    SimWorks: Outer Cables

    , ,

    This is a complete reproduction of a steel rounded outer cable which used to be produced between 1950 and around 1970. However, this is not just only a reproduction but including an inner liner adapting a modern usage standard, which didn’t come along within those days, and pulling a brake lever becomes much lighter. The appearance is a vintage look to fit in various kind of styles, but speed change performance is completely the same as modern technology.

    We reached the closest color of the outer cable at the time as much as possible by adjusting each color so many times, and we brought it back with the vintage look the most. It also includes flexibility, which is the greatest features of Nissen company, so that it will give you the comfort around a handlebar which makes the cable harder to turn in these days.

    $59.00$65.00
    $59.00$65.00
  • Sim drops

    SimWorks: Sim Drops

    , ,

    If you would like to assemble your bike completely, as you desire, you need to make every little part fit perfect. We, SimWorks, design several beautiful handle bars by Nitto and at the end of these handle bars, you might want to consider Sim Drops. For your safety and precious sparkling riding time. For 22mm diameter Bars. Material: Aluminium Bar inside: 15.5 - 17 mm Colour: Red, Green, Black

    $35.00
  • Sögreni: Leather Handlegrips

    , , ,

    Made from the finest Polish leather wrapped over a high quality Finnish plastic, the handle grips are stitched and assembled with Danish craftsmanship. The handles are nice to hold and have a classy look to them.

    When you get these, you may encounter some difficulty mounting them, as the plastic is just tight enough to fit a normal frame. The trick is to use either pressurised air, or to lubricate the inside with a generous amount of pure alcohol. If you are quick, you will be able to press them on, the alcohol will evaporate, and the handle will be securely stuck on forever.

    $99.00
  • Velo Orange: Cork Grips

    , ,

    Just like on an old fishing pole, these are natural cork grips. Cork grips absorb shock and don't get slippery. They are nicely shaped to fit your hand and very comfortable. Perfect for your city bike or classy mountain bike. They also look great with shellac! Black grips made of black rubbery foam mixed with cork.

    If these or any grips fit too loosely on your bars, put a bit of tape on the bar first. Any tape will do, electrical, duct, athletic, Tressostar. Fits standard 22.2mm (grip area) bars only. Price is per pair.

    $25.00
  • Cinelli: Art Grips Mike Giant Velvet Ribbon

    , , ,

    Graphic tattoo by Californian Master Mike Giant and the sensational softness of Velvet ribbon now available with multi-density grips. Sealing rings made of anodized Aluminum customized Cinelli. Material: Synthetic tape - multi-density grip Internal diameter: 22.4 mm Length: 129 mm Finishing: Black Velvet - Red Velvet

    $55.00
  • Ergon Grips GA3

    , , ,

    The best of both worlds. The new all-mountain comfort grip. This concept combines the relief benefits and wrist support of ergonomic wing grips with the freedom of movement of rounder MTB grips. Experience gained with the GA2 showed that the ergonomically optimised shape allows for low gripping forces; textures are adapted to the grip zones of the human hand; wall thickness of the inner core double butted to increase damping comfort. The excellent grip is typical for Ergon. The super soft, UV-stable rubber compound is exclusively manufactured in Germany for Ergon! This allows greater control even on demanding trails. The inboard clamp allows even more gripping area at the end of the bars, it is completely secure and carbon bar friendly. With replaceable endplug. - Anti-Slip, Soft Rubber Inserts, Improved Grip - Plastic Internal Skeleton Supports the Wrist, while the Soft-Rubber Ensures Sufficient Damping - Medical Grade, Durable Rubber Compound, Made in Germany - Optimized Pressure Distribution. Prevents Numbness and Aching - Smooth Texture Prevents Thumb Friction - Improved Pressure Distribution through precise support in the area of the ball of the thumb and to distribute hand pressure wide on the handlebar. - Corrected hand position relieves pressure on the nerve and eliminates pain and discomfort. Preventing possible injuries to the wrist.

    $60.00
  • $70.00$90.00

    Ergon Grips GP1

    , , ,

    The original ergonomic grip. The GP1 sets the worldwide standard in ergonomic comfort, materials, and quality. The GP1 eliminates numb hands, aching fingers, and tired forearms. The uniquely shaped grip body is made from 100% German, TÜV-certified rubber compounds of the purest quality – with infused Medical-grade white mineral oil for improved flexibility and durability. A forged aluminum clamp allows the grip to be adjusted for the perfect fit, can be easily readjusted, and eliminates twisting once installed. (Carbon bar compatible). - Anti-Slip, Soft Rubber Inserts, Improved Grip - Aluminum and Composite Clamping System. Suitable for Carbon Fiber bars - Plastic Internal Skeleton Supports the Wrist, while the Soft-Rubber Ensures Sufficient Damping - Medical Grade, Durable Rubber Compound, Made in Germany - Optimized Pressure Distribution. Prevents Numbness and Aching - Smooth Texture Prevents Thumb Friction - Improved Pressure Distribution through precise support in the area of the ball of the thumb and to distribute hand pressure wide on the handlebar. - Corrected hand position relieves pressure on the nerve and eliminates pain and discomfort. Preventing possible injuries to the wrist.

    $70.00$90.00
    $70.00$90.00
  • $100.00

    Ergon Grips GP3

    , , ,

    One of the best-selling Ergon grip. Whether mountain bike, fitness bike or touring bike – the GP3’s three-finger bar end has proven itself everywhere. Optimized ergonomics and function, highest quality, tested back-friendly. The clamping mechanism (Pat. pend) makes assembly quick, simple and effective. Approved for carbon handlebars. - Anti-Slip, Soft Rubber Inserts, Improved Grip - Plastic Internal Skeleton Supports the Wrist, while the Soft-Rubber Ensures Sufficient Damping - Medical Grade, Durable Rubber Compound, Made in Germany - Optimized Pressure Distribution. Prevents Numbness and Aching - Smooth Texture Prevents Thumb Friction - Improved Pressure Distribution through precise support in the area of the ball of the thumb and to distribute hand pressure wide on the handlebar. - Corrected hand position relieves pressure on the nerve and eliminates pain and discomfort. Preventing possible injuries to the wrist.

    $100.00
    $100.00
  • $130.00

    Ergon Grips GP5

    , , ,

    The Ergon grip with a full size, multi-position bar end for maximum hand positions and increased leverage and stability when climbing or during out of the saddle cycling. Perfect for commuting, touring or for those who like a longer bar end. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP5 eliminates numb hands, aching fingers, and tired forearms. The GP5 is made from 100% German, TÜV-certified rubber compounds of the purest quality. (Cannot be used on carbon handlebars) - Anti-Slip, Soft Rubber Inserts, Improved Grip - Plastic Internal Skeleton Supports the Wrist, while the Soft-Rubber Ensures Sufficient Damping - Medical Grade, Durable Rubber Compound, Made in Germany - Optimized Pressure Distribution. Prevents Numbness and Aching - Smooth Texture Prevents Thumb Friction - Improved Pressure Distribution through precise support in the area of the ball of the thumb and to distribute hand pressure wide on the handlebar. - Corrected hand position relieves pressure on the nerve and eliminates pain and discomfort. Preventing possible injuries to the wrist.

    $130.00
    $130.00
  • $164.00$239.00

    Sögreni: Pedals

    , ,

    The hand-crafted Sögreni pedal is made from solid high quality steel, and your choice of aluminium, brass or copper sides. A stylish way to mount your bicycle, with the brass getting better and better with time as it turns green. The pedals are hand-made in Copenhagen, and will bring pleasure to your rides while greatly improving your bicycle aesthetic.

    Choose between aluminium, brass or copper, single or double wall. The sturdy pedals come with the Sögreni brand stamped on them. Match the pedals with the Sögreni bike bell for a complete harmonious look.

    $164.00$239.00
    $164.00$239.00