All Products

Filters

Showing 217–240 of 283 results

Brands

Size

Price Filter

217-240 of 283 products

  • $199.00

    Velo Orange: Constructeur Front Rack

    , ,
    The Constructeur Front Rack is a medium sized front rack that attaches to your fork's dropout eyelets. It's simple design is perfect for a handlebar bag, tied-down dry bag, or basket. All Velo Orange racks are made from polished tubular stainless steel, so they will never rust or flake, and can be re-polished to a mirror shine even after years of use. As with our other racks, there are light mounts on the side of the platform. The height of the rack from the lowest hole on the tang to the bottom of the platform is 37cm. The platform is 20cm long and 10cm wide. The tombstone (backstop) is 9.5cm tall. There are three holes in the lower tang so that it can be cut to give your bike a real Constructeur-style. 15lbs (6.8kg) maximum weight capacity. Please note: This rack does not fit suspension forks.
    $199.00
    $199.00
  • $85.00

    Velo Orange: 1″ Sealed Bearing Threaded Headset

    , , ,
    A absolutely top-of-the-line 1" threaded headset for the most discerning rider. It features oversized, sealed cartridge bearings, so packing and re-greasing bearings are a thing of the past. Specs: Fork type: 1" English threaded Stack height: 41mm S.H.I.S. Upper: EC30 / 25.4-24tpi S.H.I.S. Lower: EC30 / 26 Crown Race: ISO (26.4mm), split for easy install VO Frame Compatibility: Polyvalent (gen 1-4), Campeur, Rando, Mixte
    $85.00
    $85.00
  • $255.00

    Velo Orange: Grand Cru High Flange Front Hub 32H

    , ,
    The counterpart to our rear Grand Cru Freewheel Hubs and Grand Cru Touring Hubs: like the rear hubs, our High Flange Front Hub features the same high polished and clear anodised finish, chrome plated axle, and high quality Japanese bearings. The hubshell design is a VO original, and the Grand Cru logo is stamped – not laser etched – giving it a more classic yet very durable aesthetic. Includes quick release. SPECIFICATIONS: Fork Spacing: 100mm QR Spoke flange diameter: 61mm Left Center-to-Flange: 32mm Right Center-to-Flange: 32mm Finish: Polished Aluminum Alloy Weight: 180g Drilling: 32 hole
    $255.00
    $255.00
  • Velo Orange: Disc Front Hub

    , ,
    The Velo Orange Disc Front Hub is designed for touring, randonneuring, and commuting in all weather conditions. The high flanges allow room for large, sealed cartridge bearings so your hubs will be spinning happily for a long time. The hub kit includes replaceable end caps and are compatible with QR as well as 12mm and 15mm thru-axles in 100mm spacing. Available in Polished Silver and Smooth Noir finishes. Fork Spacing: QR, 12mm Thru-axle, 15mm Thru-axle (all 100mm spacing) Rotor Attachment: 6 bolt Spoke flange diameter: 58mm Left Center-to-Flange: 22mm Right Center-to-Flange: 35.33mm Drilling: 32 or 36 hole Note: does not include skewer or thru-axle.
    $169.00
  • Velo Orange: Disc Rear Hub

    , ,
    The Velo Orange Rear Disc Hub is specially designed for touring, randonneuring, and commuting in all weather conditions. The hub's high flanges allow room for large, sealed cartridge bearings so your hubs will be spinning happily for a long time. The hub includes replaceable end caps to convert from 135mm QR to 142mm Thru-axle. All without requiring any tools. The free hub features a tool-free disassembly for maintenance or roadside drive side spoke replacement. Available in Polished Silver and Smooth Noir finishes. Frame Spacing: 135mm QR or 142mm Thru-Axle (replaceable endcaps included) Spoke Flange Diameter: 58mm Left Center-to-Flange: 34.53mm Right Centre-to-Flange: 16.81mm Weight: 360g w/ Shimano FHB Drilling: 32 or 36 hole Rotor type: 6-bolt Free hub Body (let us know in your order's comments which you'd prefer): 11 speed compatible Shimano, Campagnolo (currently out of stock, sorry) or Sram XDR. Note: Quick-release skewer and thru-axle not included.
    $375.00
  • $139.00

    Velo Orange: Thumb Shifter Mount

    , ,
    Don't throw out those vintage downtube shifters - they're the perfect match for city bikes, tourers, and porteurs! They're lightweight, simple, inexpensive, and are compatible with almost any front and rear derailleur. Although, they can be a pain to reach for in traffic. The VO Thumb Shifter Mounts allow you to mount downtube and bar-end shifters on your handlebars. These thumbies put your shifter within easy reach while avoiding the complexity of brifters. They can even be used on drop bars. Compatible with any standard road, mtb, and city handlebars (22.2 and 23.8mm grip area) Hinged design so you don't need to remove any components or accessories for installation Integrated barrel adjustor to dial in cable tension on the fly They fit Dia-Compe Downtube Shifters, Dia-Compe Bar End Shifters, Shimano 10/9/8 speed Bar End shifters in addition to a ton of vintage downtube and bar-end shifters Sold as a pair. Shifters not included. Note: Not compatible with Microshift shifters (the shifter is too tall) or Dia-Compe 11s road/10s dynasys shifters.
    $139.00
    $139.00
  • Velo Orange: Grand Cru Quill Stem

    , , ,
    The Grand Cru Quill Stem is made using a custom one-piece steel quill and extension. The clamp is welded onto the extension, and the weld is hand-filed smooth on top. This results in a strong, yet light, stem with a classic shape. There is a 5mm boss on the drive side for mounting a Brass Temple Bell (installation instructions here). Not compatible with the Striker Bell. Specs: Clamp: 26.0mm Quill Diameter: 22.2mm (for 1" steerer) Angle: -17deg Height above insert: 120mm Total Height: 180mm Weight: 385g (100mm size)
    $145.00
  • $170.00

    Velo Orange: Cigne Stem

    , , ,
    The Cigne Stem gets its name from the French word for swan. The shape is inspired by the old gooseneck LD stems by Ibis and Cunningham, but with a few accommodations for modern bike needs. 1 1/8" threadless and 31.8mm handlebar clamp with a removable faceplate. With 145mm of vertical height from the base of the stem to the centre of the clamp, it's pretty useful for getting your handlebars up high without using a ton of spacers. Available in High Polish, Nickel, and Noir. Specs: Handlebar Clamp: 31.8mm Steerer Clamp: 1-1/8" Height: 145mm (base to centre of clamp) Weight: 343g (90mm size) Installation: The Cigne functions as both your stem and top cap. Your star-nut should be approximately 1cm from the top of your steerer tube and you need at least 55mm of tube (metal only, not for use with carbon steerers). Now slide your stem on the steerer, slip in the long bolt with the washer, pretension with the long bolt, and clamp it down at the base. Use grease as needed. Use these 2-piece handlebar shims if you need to reduce from the 31.8mm clamp diameter: 26.0mm and 25.4mm
    $170.00
    $170.00
  • $80.00

    Velo Orange: Tall Stack Stem 1 1.8″/100mm

    , , ,
    The VO Tall-Stack Stem offers a super clean look on a modern bike. The angle is 17 degrees, so the stem is level on most frames. Available in polished Silver and Noir. The stem is cold forged alloy with a polished finish. Specs: Handlebar Clamp: 31.8mm Steerer Clamp: 1-1/8" Angle: -17deg Stack Height: 75mm Weight: 148g (100mm size) Note: that there is a minimum-insertion line marked inside the stem, about 10 mm below the top. Not recommended for carbon steerer tubes.
    $80.00
    $80.00
  • Velo Orange: Threadless Stem

    , , ,
    A simple, polished, all-silver threadless stem with a 25.4 or 31.8 clamp diameter. It's flippable to really dial in your fit. Available in 6 degree rise/drop in a variety of extension lengths. 4 bolt handlebar clamp. Length is measured centre-to-centre along extension. Specs: Handlebar Clamp: 25.4mm or 31.8mm Steerer Clamp: 1-1/8" Stack Height: 40mm Weight: 140g (100mm size)
    $70.00
  • $55.00

    Velo Orange: Threadless Stem Adaptor

    , , ,
    The VO Threadless Stem Adaptor allows you to use threadless stems on bikes designed for quill stems. Many threadless stems have removable face plates, so bars need not be "stripped down" when switching stems. Works with standard 22.2 mm threaded forks and 1 1/8" stems 180 mm total length 110 mm above the minimum insertion line Steel bolt and wedge 1 1/8" stems should have 40 mm stack heights - VO stems fit perfectly High polish silver finish 272 gr Note: not compatible with VO Tall-Stack, Happy, and Cigne Stems as their stack height requirements are taller than 40mm. Stem not included.
    $55.00
    $55.00
  • $29.00

    Velo Orange: Front Cable Stop with Adjuster Silver

    , ,
    This is a simple aluminium cable stop with a barrel adjuster for 1" forks. Stack height is about 5mm. Silver only.
    $29.00
    $29.00
  • $10.00
    $10.00
  • $140.00

    Soma: Odin Handlebar 25.4 / 715mm Black

    , ,
    Soma - Odin Handlebar The Odin gives you the extra sweep of a riser bar without the rise. Rotate slightly to add a bit of downward or upward sweep. Specs: Material: Tange Aluminium Width: 715mm Rise: 0mm Back Sweep/Up Sweep: 15d/0d Weight: 360g Clamp Diameter: 24.5mm
    $140.00
    $140.00
  • $150.00

    Soma: Portola 26.0mm

    , ,
    Soma - Portola Handlebar This bar is similar to our June Bug dirt drop bar, except it uses a 26.0mm centre and comes in a narrower width. Nice option to try for adventure touring, trail riding or commuting. Width at lever mounting area: 41cm (53cm size), 45.5cm (56cm size) approx. Material: 6061 T6 Alloy C-C Width: 53cm/56cm (At bar ends) Drop: 112mm Reach: 65mm Clamp Diameter: 26mm
    $150.00
    $150.00
  • spacers
    spacers
    $13.50$18.50

    SimWorks: With Me (Cr-Mo) Spacers 1 1/8

    , , ,

    Wear your heart on your bike. Add a little flair for your love with Me CrMo spacers. 1-1/8″ available in CP Polish or Black.

    $13.50$18.50
    $13.50$18.50
  • Free
    Sim Works x Nissen Shift Stainless Outer Cable
    Sim Works x Nissen Brake Outer French
    $0.00$65.00

    SimWorks: Outer Cables

    , ,

    This is a complete reproduction of a steel rounded outer cable which used to be produced between 1950 and around 1970. However, this is not just only a reproduction but including an inner liner adapting a modern usage standard, which didn’t come along within those days, and pulling a brake lever becomes much lighter. The appearance is a vintage look to fit in various kind of styles, but speed change performance is completely the same as modern technology.

    We reached the closest color of the outer cable at the time as much as possible by adjusting each color so many times, and we brought it back with the vintage look the most. It also includes flexibility, which is the greatest features of Nissen company, so that it will give you the comfort around a handlebar which makes the cable harder to turn in these days.

    $0.00$65.00
    $0.00$65.00
  • Sim drops

    SimWorks: Sim Drops

    , , ,

    If you would like to assemble your bike completely, as you desire, you need to make every little part fit perfect. We, SimWorks, design several beautiful handle bars by Nitto and at the end of these handle bars, you might want to consider Sim Drops. For your safety and precious sparkling riding time. For 22mm diameter Bars. Material: Aluminium Bar inside: 15.5 - 17 mm Colour: Red, Green, Black

    $35.00
  • Fizik: Bar Tape Terra Microtex Bondcush Tacky 3mm

    , , ,
    Terra are bar tapes designed for those who go off-road on drop bars. Bondcush is layered mid-padding polymer foam that aids the absorption of road buzz. Bonded to a microtex outer layer this material blend is our chunkiest option that combines comfort, versatility and durability, ideal to tackle all kind of roads. A sticky gel backing serves two functions: - it replaces the adhesive tape for an easy removal during cleaning and damps off-road chatter without feeling too squishy. Tacky finish aids a sticky nonslip surface for ultimate grip in every condition. Bondcush construction: - 3 mm thick - Gel backer - Tacky touch
    $75.00
  • Burgh: Handlebar Tape

    , ,
    BORN IN THE HELLISH DEPTHS OF TASMANIA carefully considered designs to maximise bunch envy Burgh Cycling’s aim is to collaborate and create meaningful relationships with the cycling community, to ensure we make the best possible product to meet their needs. Whether you’re bouncing over cobbles, sliding around on the cross bike, chasing KOM’s, circling the track, or scooting through alleys, our tapes will get you there in comfort and style. FEATURES a unique blend of comfort, grip & performance Our unique polymer blend creates a surface that is water resistant, shock absorbing and grippy – even in the wettest of conditions. Perfect for cyclists who love all kinds of riding – but especially for those who love to get grit, sand and mud all over their pride and joy. CLEANING keep things looking top notch A quick wipe with a damp cloth and some elbow grease is all that is required to keep our tapes fresh as daisies! With their water resistant qualities, give them a good hose if you really like!
    $56.00
  • $79.00
    $79.00
  • bar plug

    Cinelli: Anodized Bar Plugs

    , , ,
    Re-issue of the classic “Cinelli Milano” bar plugs; available with aluminium caps anodized in five pop colors: silver, blue, gold, red and purple, and in addition this year, green, orange and black.
    $15.00
  • Ergon Grips GA3

    , , ,

    The best of both worlds. The new all-mountain comfort grip. This concept combines the relief benefits and wrist support of ergonomic wing grips with the freedom of movement of rounder MTB grips. Experience gained with the GA2 showed that the ergonomically optimised shape allows for low gripping forces; textures are adapted to the grip zones of the human hand; wall thickness of the inner core double butted to increase damping comfort. The excellent grip is typical for Ergon. The super soft, UV-stable rubber compound is exclusively manufactured in Germany for Ergon! This allows greater control even on demanding trails. The inboard clamp allows even more gripping area at the end of the bars, it is completely secure and carbon bar friendly. With replaceable endplug. - Anti-Slip, Soft Rubber Inserts, Improved Grip - Plastic Internal Skeleton Supports the Wrist, while the Soft-Rubber Ensures Sufficient Damping - Medical Grade, Durable Rubber Compound, Made in Germany - Optimized Pressure Distribution. Prevents Numbness and Aching - Smooth Texture Prevents Thumb Friction - Improved Pressure Distribution through precise support in the area of the ball of the thumb and to distribute hand pressure wide on the handlebar. - Corrected hand position relieves pressure on the nerve and eliminates pain and discomfort. Preventing possible injuries to the wrist.

    $70.00
  • $80.00$110.00

    Ergon Grips GP1

    , , ,

    The original ergonomic grip. The GP1 sets the worldwide standard in ergonomic comfort, materials, and quality. The GP1 eliminates numb hands, aching fingers, and tired forearms. The uniquely shaped grip body is made from 100% German, TÜV-certified rubber compounds of the purest quality – with infused Medical-grade white mineral oil for improved flexibility and durability. A forged aluminum clamp allows the grip to be adjusted for the perfect fit, can be easily readjusted, and eliminates twisting once installed. (Carbon bar compatible). - Anti-Slip, Soft Rubber Inserts, Improved Grip - Aluminum and Composite Clamping System. Suitable for Carbon Fiber bars - Plastic Internal Skeleton Supports the Wrist, while the Soft-Rubber Ensures Sufficient Damping - Medical Grade, Durable Rubber Compound, Made in Germany - Optimized Pressure Distribution. Prevents Numbness and Aching - Smooth Texture Prevents Thumb Friction - Improved Pressure Distribution through precise support in the area of the ball of the thumb and to distribute hand pressure wide on the handlebar. - Corrected hand position relieves pressure on the nerve and eliminates pain and discomfort. Preventing possible injuries to the wrist.

    $80.00$110.00
    $80.00$110.00
Action Bicycle Club