Components

Filters

Showing 97–120 of 143 results

Brands

Size

Price Filter

97-120 of 143 products

  • $70.00

    Velo Orange Stem Adapter

    , ,
    The VO Threadless Stem Adaptor allows you to use threadless stems on bikes designed for quill stems. Many threadless stems have removable face plates, so bars need not be "stripped down" when switching stems. - Works with standard 22.2 mm threaded forks and 1 1/8" stems - 180 mm total length - 110 mm above the minimum insertion line Steel bolt and wedge - 1 1/8" stems should have 40 mm stack heights - VO stems fit perfectly - High polish silver finish 272 gr Note: not compatible with VO Tall-Stack, Happy, and Cigne Stems as their stack height requirements are taller than 40mm. Stem not included.
    $70.00
    $70.00
  • Velo Orange Long Setback Seatpost 27.2

    , ,
    These two-bolt seat posts have a generous 30mm of setback, among the longest ever. This is very important for those who ride leather saddles that often have little fore-and-aft adjustment due to the short rails. The VO seatpost is internally ovalized to reduce weight to 301g. The adjustment is from the bottom, and the two-bolt design makes it easy to precisely adjust the seat angle. Also note that the head is integral with the post, not pressed on as on many modern posts. This makes them stronger and lighter. 27.2mm only x 300mm. Maximum height (above the min. insert line) is about 23cm. Weight for the seat post is 282 gr.
    $130.00
  • Velo Orange 0 Setback Seatpost 27.2

    , ,
    Our Zero Setback Seatposts have garnered a lot of popularity with MTBs and bike packing riders for their strength and ease of adjustment.  The seatpost is internally ovalized to reduce weight (295g), and the head is integral with the post, not pressed on as on many modern posts. These factors combined makes for a super strong and light perch. All forms of adjustment can be done with a single 5mm wrench to the side of the clamping mechanism. 27.2mm x 400mm. Maximum height (above the min. insert line) is about 300mm. Available in Polished Silver and Noir.
    $130.00
  • Sold out
    $240.00

    Velo Orange: Grand Cru Zeste Cantilever Brakeset

    , ,
    The Zeste Brakes may be the most powerful and most adaptable cantilever brakes we've tried. Low-profile cantilever brakes are a favorite among cyclo-tourists and commuters because the design helps them clear luggage and, on small frames, your heels. Dirt trail riders and cyclo-cross'ers will appreciate the double plate design for superior mud-clearing. The brake's strength and easy modulation is due to the extra-long arms for increased mechanical advantage. But just as important is their excellent adjustability: - There are spring tension adjusters on each arm for easy centering. - Up and down adjustment in the brake pad slot results in greater frame and fork compatibility; not all canti studs are in exactly the same place on every bike due to manufacturing tolerances or intended specification. - A barrel adjuster at the end of the straddle wire means easier setup and fine tuning for perfect clearance and wire angle. You'll wonder why all canti brakes don't have these. - Brake pad holders have adjustable toe-in. - High-quality, included pads help you stop quickly and safely. - The pivot bolts and washers are stainless steel for long term corrosion resistance. Price is for two sets, a bike's worth. Includes straddle hangers, mounting bolts, and cable end caps.
    $240.00
    $240.00
  • Sold out
  • $10.00

    Velo Orange: Sliding Bracket Large

    , , ,
    This stainless steel fender bridge is bent around the fender, then crimped with pliers. It can be used on VO, Honjo, and other metal fenders. Use the narrower model for fenders up to 50mm wide; use the wider version for wider fenders.
    $10.00
    $10.00
  • Sold out

    Velo Orange Front Cable Stop with Adjuster Silver

    , ,
    This is a simple aluminium cable stop with a barrel adjuster for 1" forks. Stack height is about 5mm. Silver only.
    $29.00
  • Velo Orange: Alloy Handlebar Shims 2 Piece

    , ,
    These two-piece, alloy shims allow a 25.4mm or 26mm handlebars to fit 31.8mm clamp diameter stems. Can be used on two-bolt faceplate stems or four-bolt faceplate stems. 40mm wide
    $20.00
  • Velo Orange: Dia-Compe Cable Housing Clips

    , ,
    These stainless steel clips are for securing housing to frames without brazed-on guides. Perfect for restorations and are available in all three common steel tubing sizes - 25.4, 28.6, and 31.8mm. Sold in packs of three.
    $30.00
  • Velo Orange: Elkhide Chainstay Protector, Hand Cut

    , , , ,

    These are soft leather with a self-adhesive double-stick tape on the back. They match our elkhide sewn-on handlebar covers and toe clip leathers. They protect your paint from chain slap and give your bike a finished look. In decades past, constructeurs actually brazed on fittings over which a leather strip was stretched. Our elkhide strips are the next best thing. Like all of our elkhide leather goods, they are cut by hand in the US.

    $20.00
  • $45.00

    Velo Orange: Fender Hardware Kits – Silver

    , , ,
    This hardware kit is compatible with VO, Honjo, Lefol, and pretty much any other proper metal fenders that use drawbolts. The kits are available in both Silver and Noir. Hardware Kit includes: 4 * R clips 7 * leather washers 8 * star washers 4 * M5 daruma bolts 4 * daruma cups 1 * M6 daruma bolt 1 * large washer for under fork crown 1 * rubber washer for under fork crown 1 * L-bracket 1 * M6 Phillips head bolt 4 * 12mm M5 bolts 1 * 20mm M5 bolt 2 * M6 nyloc nuts 5 * M5 nyloc nuts 5 * washers for M5 bolts 2 * washers for M6 bolts
    $45.00
    $45.00
  • $12.00

    Velo Orange: Leather Washers for Mounting Fenders

    , , ,
    Essential to the proper mounting of metal fenders, they are also useful for racks and other accessories. Use one or two of the washers between the fender and the fork crown, the seat stay bridge, the chain stay bridge, and between the fender and racks mounted to the fender. They are intended to dampen vibration, lessen the likelihood of stress cracks, and reduce noise from pebbles and twigs bouncing into the fenders. These washers are made for us by the same company that supplies Steinway Pianos with all their washer needs. The price is for a pack of six, colors may vary. OD is 12mm; ID is 5mm.
    $12.00
    $12.00
  • $650.00

    Phil Wood Track Hub Rear High Flange Pro 32H

    , ,
    Our Pro rear high flange double fixed track hubs are available in 24, 28, and 32 spoke hole configurations (other spoke hole count options are available upon request). Our Pro track hubs come with our Carbonyte Phil spec bearings which are our low drag bearing option which have partial contact seals and have a 30% fill with our full synthetic Phil Carbonyte grease.
    $650.00
    $650.00
  • Phil Wood Track Hub Front High Flange Pro 32H

    , ,
    Our Pro front high flange track hubs are available in 20, 24, 28, and 32 spoke hole configurations (other spoke hole count options are available upon request). Our Pro track hubs come with our Carbonyte Phil spec bearings which are our low drag bearing option which have partial contact seals and have a 30% fill with our full synthetic Phil Carbonyte grease.
    $575.00
  • Phil Wood Hub Centre Lock Disc Brake T/A 100mm

    , ,
    Our front Center Lock disc hubs are available in 24, 28, and 32 spoke hole configurations (other spoke hole count options are available upon request). We also offer our front Center Lock Disc hubs with 2 bearing options: Standard Phil spec bearings which have full contact seals and have a 100% fill with our Phil Waterproof grease. Carbonyte Phil spec bearings are our low drag bearing option which have partial contact seals and have a 30% fill with our full synthetic Phil Carbonyte grease. Please note: When checking out please specify in the notes section which end cap set you would like with your front Center Lock disc hub. You can select one of the following: standard Q-R, 12 mm thru axle or 15 mm thru axle. All options will give you a 100 mm spacing. 
    $459.00
  • Phil Wood Stem Cap 1-1/8 Alloy

    , ,
    We manufacture our aluminum stem caps from US-produced 7075 aluminum. We engrave our script “Phil” into each stem cap and hand paint them just like our hubs. All of our stem caps are machined in-house to the same high-quality standards we apply to all of our products. Our stem caps are only available for 1" and 1-1/8" headsets.
    $32.00
  • Sold out
    $140.00

    Soma: Odin Handlebar 25.4 / 715mm Black

    , ,
    Soma - Odin Handlebar The Odin gives you the extra sweep of a riser bar without the rise. Rotate slightly to add a bit of downward or upward sweep. Specs: Material: Tange Aluminium Width: 715mm Rise: 0mm Back Sweep/Up Sweep: 15d/0d Weight: 360g Clamp Diameter: 24.5mm
    $140.00
    $140.00
  • Soma: Portola Handlebar

    , ,
    Soma - Portola Handlebar This bar is similar to our June Bug dirt drop bar, except it uses a 26.0mm centre and comes in a narrower width. Nice option to try for adventure touring, trail riding or commuting. Width at lever mounting area: 41cm (53cm size), 45.5cm (56cm size) approx. Material: 6061 T6 Alloy C-C Width: 53cm/56cm (At bar ends) Drop: 112mm Reach: 65mm Clamp Diameter: 26mm
    $150.00
  • Sold out

    Soma Leather Toe Straps

    ,
    Sold as a pair (left and right)
    $55.00
  • Fizik Bar Tape Terra Microtex Bondcush Tacky 3mm

    , , ,
    Terra are bar tapes designed for those who go off-road on drop bars. Bondcush is layered mid-padding polymer foam that aids the absorption of road buzz. Bonded to a microtex outer layer this material blend is our chunkiest option that combines comfort, versatility and durability, ideal to tackle all kind of roads. A sticky gel backing serves two functions: - it replaces the adhesive tape for an easy removal during cleaning and damps off-road chatter without feeling too squishy. Tacky finish aids a sticky nonslip surface for ultimate grip in every condition. Bondcush construction: - 3 mm thick - Gel backer - Tacky touch
    $75.00
  • Burgh: Handlebar Tape

    , ,
    BORN IN THE HELLISH DEPTHS OF TASMANIA carefully considered designs to maximise bunch envy Burgh Cycling’s aim is to collaborate and create meaningful relationships with the cycling community, to ensure we make the best possible product to meet their needs. Whether you’re bouncing over cobbles, sliding around on the cross bike, chasing KOM’s, circling the track, or scooting through alleys, our tapes will get you there in comfort and style. FEATURES a unique blend of comfort, grip & performance Our unique polymer blend creates a surface that is water resistant, shock absorbing and grippy – even in the wettest of conditions. Perfect for cyclists who love all kinds of riding – but especially for those who love to get grit, sand and mud all over their pride and joy. CLEANING keep things looking top notch A quick wipe with a damp cloth and some elbow grease is all that is required to keep our tapes fresh as daisies! With their water resistant qualities, give them a good hose if you really like!
    $56.00
  • $79.00
    $79.00
  • $50.00$70.00

    Cinelli Cork Tape

    , ,
    If it’s not a Cinelli it’s not an original Cork ribbon, introduced by Cinelli in 1987. Winner of the 2000 Consumer Choice Award. Includes caps and finishing tape.
    $50.00$70.00
    $50.00$70.00
  • bar plug

    Cinelli: Anodized Bar Plugs

    , , ,
    Re-issue of the classic “Cinelli Milano” bar plugs; available with aluminium caps anodized in five pop colors: silver, blue, gold, red and purple, and in addition this year, green, orange and black.
    $15.00
Action Bicycle Club