Merida: eSPRESSO CC 400 EQ
TWO FRAME OPTIONS
The eSPRESSO CC is available with the new ‘Energy Cradle’ frame, where the 745 or 630 Wh battery (depending on model) is housed on top of the downtube, and can be accessed via a removable aluminium battery cover, or as a semi-integrated frame, where the 504 Wh battery is integrated into the lower part of the downtube.
EXCELLENT FRAME STIFFNESS THROUGH ENERGY CRADLE
Unique cradle like shaping of the downtube to accommodate the battery, without losing the all important frame stiffness of our low step-through frames. By not adding cutouts to the downtube, we can maintain the outstanding frame stiffness, that prevents our low step-through bikes from wobbling under load. Paired with an aluminium battery cover, the frames give the impression of an integrated battery, without sacrificing stability and battery accessibility. The tapered head tube, the large tube diameters and the forged motor bracket all contribute to achieving a safe and precise riding experience.
The eSPRESSO CC come fully equipped with fenders, kickstand, carrier and lights. Ready for any outing you can think of.
OPTIMISED CENTRE OF GRAVITY
A centrally positioned low centre of gravity, which has been achieved through the positioning of the battery in the lower position of the downtube as well as the location of the Shimano motors, enables to deliver fantastic riding characteristics in any situation which are extremely important in particular in wave low step through frames which have the tendency to chatter and jitter when power is applied.
650B WHEELS WITH BIG VOLUME TYRES
The decision to use 650B wheels with 2.25″ off-road tread pattern for our CC models is not just a design feature but has more practical reasons. To add big volume tyres to an e-bike provides increased comfort but also extra traction and therefore more safety reserves. Small and even bigger bumps can easily be rolled over, and a big volume tyre provides more puncture protection compared to a narrow one.
INTERNAL CABLE ROUTING
We feature internal cable routing on all models. Cables are routed through the frame, entering and exiting through smooth sockets. Only a clever system for our internal guiding and fixing guarantees reliable and rattle free routing, whilst the cables are protected from moisture and dirt and gives the bike a cleaner look.
The Shimano mid-mounted motor, in combination with the forged motor bracket provides one of the lowest step-through heights in the market.
eSPRESSO CC LITE II – Aluminium, 27,5×2,25″ Max. Wheel Size, 135x9mm Axle Standard, Internal, Max. 630 Wh
|Frame Size||XS, S, M, L, XL|
|Colour||Silk Titan (Black)|
Suntour NVX30 DS, Coil, 80mm Suspension Travel, 27,5×2,4″ Max Wheel Size
|Brakes||Shimano MT-200 2 Piston Front and Rear|
|Rotors||Shimano RT10 180mm Front and Rear|
Merida Cap w/ Wire Gateway
Merida Expert TK, Aluminium, 660mm Width, 15mm Rise
|Derailleur R||Rear – Shimano Deore M5120, SGS|
|Shifter Rear||Shimano Deore M4100|
Merida Expert TK, Aluminium, 30.9mm Diameter, 15mm Setback, 40mm Seat Post Suspension Travel
|Seat Clamp||Merida Expert|
|Saddle||Merida Expert TK V-Mount|
|Chain||KMC e10s EPT|
Shimano FC-E8000, 165 mm
Shimano M4100, 11-46 Teeth, 10 Speed
Merida Comp TK, 20mm Inner Width, Aluminium
Maxxis Crossmark II, 27.5×2.25″, Wire, Reflecting Line Front and Rear
Front – Shimano TX505, 100x9mm Width Front Hub, 32 Spoke Holes, Centerlock / Rear – Shimano TX505, 135x9mm Width Rear Hub, 36 Spoke Holes, Centerlock
|Lighting||Front – Herrmans H-Black MR4 E / Rear – Spanninga Commuter Glow XE Integrated in Merida MIK HD Carrier|
|Carrier||Merida MIK HD Carrier with Spring Clip & Spanninga Rear Light|
|Fender||Sunnywheel SW-FA-311-65A (MSB)|
|Frame Lock||Abus 4650 XL|
|Battery Lock||Abus Key|
|Interface||Water and dustproof with advanced functions for owner preference|
Shimano E6100, 60Nm
|Controller||Full pedal speed sensors built into motor for an intuitive rider experience|
Shimano E8036, 630Wh
|Charger||Shimano EC-E6002 36V2.0Ah Charger|
|Max. Speed||Easily adjustable power up to 32 kmph|
|Range||40-70+km Pedal Assist|
|Power modes||3 levels of pedal-assist mode|
|Warranty||Lifetime frame, 2 years motor/battery/display and 12 months on everything non-consumable|